Dolls House Miniature DF003 - DF1472 - E2747 Working grandfather clock

1/12th scale working mahogany grandfather clock with opening case and decorative pendulum.

The time can be changed by removing the clock face and turning the winder on the side. The battery in the clock is replaceable.

5cm wide (max) x 16.5cm high x 3.3cm deep (max)

Exclusive quality miniatures from Minimum World

How-To Guide: Changing a Clock Battery

 

Instructions

1. Cover all the wooden area surrounding the clock face with masking tape to protect the woodwork from damage

2. Carefully work round the outer edge of the clock face to prize out (a scalpel is the best tool to use for this)

3.When the clock face is removed slide off the plastic surround which holds the clock face firmly in the wood surround

4. Using the scalpel, work round the join at the back of the case and lever out to gain access to change the battery

5. To adjust the time ease the winder out just like a watch, set time and push the winder back in

6. When reassembling be careful to get the split plastic ring which fits round the winder spindle in the correct place before refitting the back

7. Check working, then slide on outer plastic ring before locating in wooden housing after removing masking tape

 

This product is not suitable for children under 14