Basket:0 items, $0.00
Home » Shop by Product » Dolls House Lighting » Accessories » Cir-Kit CK1033-3 Clear Heat Shrink Tubes
Loyalty Points 29 points
These small shrink tubes provide an excellent means of connecting 32-gauge wires such as GOW bulb wires together without the use of solder. The shrink tube is simply slid over one of the wires to be joined, the bared wires twisted together, and the shrink tube slid back over the connection. Once in place a very small amount of heat from a hair dryer, match or candle may be used to shrink the tube and create a tight, insulated connection for the wires.
The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger then the insulation on a GOW bulb wire. The wall thickness is approximately .002" (the thickness of transparent tape). The end result is an extremely small diameter splice once the tube has been heated, giving a very unobtrusive electrical connection. Each tube measures approximately 1/2" long.
Supplied in packs of 12 pieces
Absolutely useless. You think you've done everything perfectly and after the connection has been tested, the wires come out with the least provocation - even when sitting in a grove with masking tape on top.
Your rating (move your mouse over to select)
Click the odd one out to submit your review
Customers Who Bought This Also Bought:
LT9018 - 32g Wire 50 foot (DE086)
LT9039 - Pack of 4 Bi-Pin Bulbs
DIY196 - Ceiling Rose 55mm
DIY035 - Wallpaper Paste Adhesive
Tulip Arabesques Wallpaper Pink - DIY303
E4505 - Georgian Green Wallpaper